JVS-S11-8P-120W 8Port PoE Network Switch
Product Description:
JVS-S11-8P-120W hybrid standard PoE power supply switch provides 8 10/100M adaptive RJ45 ports, 2 10/100/1000M adaptive RJ45 ports, and 1 independent SFP expansion slot. Ports 1 to 8 provide PoE power supply and can serve as Ethernet power supply devices.
All PoE ports can automatically detect and identify electrical devices that comply with IEEE 802.3af/at standards and supply power to them through network cables.
This model supports intelligent AI detection. When the monitoring device crashes or the network is abnormally interrupted, the AI algorithm is used to determine the intelligent restart of the POE port device.
Support automatic network optimization: automatically judge the status of network signal transmission, intelligent switch mode, long distance transmission is stable without disconnection.
Product Characteristics:
- Comply with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards;.
- Support IEEE 802.3af/at standard, compatible with PD that supports IEEE 802.3af/at.
- Support normal switch/automatic AI detection + port isolation (combined function) two mode.
- Provides 8 10/100m adaptive PoE power supply ports, 2 uplink 10/100/1000M adaptive RJ45 ports, and 1 independent SFP port.
- All ports support the Auto MDI/MDI-X function.
- Supports IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.
- All ports have wire-speed forwarding capability.
- Supports MAC address self-learning and aging.
- Full metal casing, full load 120W.
- Plug and play
Software Specifications
- Complies with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards.
- Compliant with IEEE 802.3af/at standards for receiving devices (PD).
- Compatible with certified non-standard electrical receiving equipment (PD).
- Store and forward.
- MAC automatic learning and aging.
- IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.
Description
| Port | 100M PoE | 8 |
| 1000M Cascade RJ45 | 2 | |
| 1.5G standard SFP port | 1 | |
| Function | Storage and Forwarding | Support |
| Exchange Content | 7.6G | |
| MAC Address | 2K | |
| Use Environment | Working temperature: 0 ℃ ~ 40 ℃
Storage temperature: -40 ℃ ~ 70 ℃ |
|
| Working humidity: 10% ~ 90% RH does not condense
Storage humidity: 5% ~ 90% RH does not condense |
||
| PoE Standard | Standard IEEE802.3af/at single port maximum power 30
WSupport overcurrent, overvoltage, short-circuit protection Support for High Power PD soft start Support sequential boot |
|
| Input Power Supply | AC input 100-250V, standard 100W/120W power supply | |
| Supported Standards & Protocols |
IEEE 802.3 Ethernet Media access Control Protocol IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE802.3z 1000Base-X SFP interface IEEE 802.3af implements power supply for Ethernet devices through Ethernet data cable pairs or devices IEEE 802.3at implements high power supply for Ethernet devices through Ethernet data cable pairs or devices IEEE 802.3x flow control |
|
| System Mode | OFF : Default working mode
ON : AI+ Intelligent long distance transmission |
|
| Data Signaling Rate | Ethernet 10Mbps half-duplex, 20Mbps full duplex
Fast Ethernet 100Mbps half-duplex, 200Mbps full duplex Gigabit Ethernet 2000Mbs full duplex |
|
| Network Medium | 1000Base-T: 4 pairs Cat5e or more UTP/STP(≤100m)
100Base-TX: 2 pairs Cat5 or more UTP/STP (≤ 100m) 10Base-TX: 2 pairs Cat5 or more UTP/STP (≤ 250m) |
|
| Physical Specification | Product size: 190mmx140mmx43mm (LxWxH) | |
Reviews
There are no reviews yet.